PRODUCT DESCRIPTION

Permatex Fast Break Super Penetrant is a clear liquid aerosol

penetrating oil designed to assist in the separation and disa

ssembly of rusted and corroded mechanical assemblies. This

low viscosity product quickly penetrates the bond of oxidized

metals and loosens the surfaces with a thin lubricating film.

Permatex Fast Break Super Penetrant was primarily designed

for loosening "frozen" corroded thread assemblies( threads

that were not assembled with the corrosion and vibration

protection fo Permatex threadlocker products).The product

also keeps linkages, pivot arms and cables rust-free, lubricated

and smooth running.

PRODUCT BENEFITS

● Immediate penetration due to low surface tension

● Lubricates oxidized metals for ease of separation

● Corrosion protection

● Helps prevent damage to fastener heads

● VOC compliant

TYPICAL APPLICATIONS MRO

● Release rusted or frozen lugs, bolts, screws, fasteners

   and metal components

● Lubricate close fitting parts

● Light lubrication of locks, hinges and tools

● General overhaul and repair work

DIRECTIONS FOR USE

1.Provide adequate ventilation.

2.Shake can thoroughly before use. Note: There is no ball

   agitator inside the can. For best results, aerosol can should

   be at room temperature before spraying.

3.Spray liberally to rusted fastener from a distance of 8 to 10

   inches. Use extention tube for hard to reach areas.

4.Tap part lightly with wrench to speed penetration, then 

   reapply.

5.After 5 minutes, disassemble fastener

6.Repeat procedure if necessary

For Cleanup

1.Clean hands with Permatex brand hand cleaners.

PROPERTIES OF MATERIAL

                                                   Typical Value

Chemical Type                     Petroleum distillates

Appearance                              Clear liquid

Odor                                         Light petroleum

Flash Point                       Aerosol, contents under pressure,

                                                     consult MSDS

NFPA 704 Flammability Rating      4(Highly flammable)

GENERAL INFORMATION

This product is not recommended for use in pure oxygen

and/or oxygen rich systems and should not be selected

for use with chlorine or other strong oxidizing materials.

For safe handling information on this product, consult the

Material Safety Data Sheet, (MSDS).

STORAGE

Products shall be ideally stored in a cool, dry location in

unopened containers at a temperature between 8 to 28 ℃

(46 to 82 ℉)unless otherwise labeled. Optimal storage is at

the lower half of this temperature range.

NOTE

The data contained herein are furnished for information only

and are believed to be reliable. We can not assume responsibi

lity for the results obtained by others over whose methods we

have no control. Permatex, Inc specifically disclaims all warr

anties expressed or implied, including warranties of merch

antability or fitness for a particular purpose, arising from sale

or use of Permatex, Inc. products and disclaims any liability

for consequential or incidental damages of any kind, including

lost profits. This product may be covered by one or more United

States or foreign patents or patent applications.