Permatex Fast Break Super Penetrant is a clear liquid aerosol
penetrating oil designed to assist in the separation and disa
ssembly of rusted and corroded mechanical assemblies. This
low viscosity product quickly penetrates the bond of oxidized
metals and loosens the surfaces with a thin lubricating film.
Permatex Fast Break Super Penetrant was primarily designed
for loosening "frozen" corroded thread assemblies( threads
that were not assembled with the corrosion and vibration
protection fo Permatex threadlocker products).The product
also keeps linkages, pivot arms and cables rust-free, lubricated
and smooth running.
● Immediate penetration due to low surface tension
● Lubricates oxidized metals for ease of separation
● Corrosion protection
● Helps prevent damage to fastener heads
● VOC compliant
TYPICAL APPLICATIONS MRO
● Release rusted or frozen lugs, bolts, screws, fasteners
and metal components
● Lubricate close fitting parts
● Light lubrication of locks, hinges and tools
● General overhaul and repair work
DIRECTIONS FOR USE
1.Provide adequate ventilation.
2.Shake can thoroughly before use. Note: There is no ball
agitator inside the can. For best results, aerosol can should
be at room temperature before spraying.
3.Spray liberally to rusted fastener from a distance of 8 to 10
inches. Use extention tube for hard to reach areas.
4.Tap part lightly with wrench to speed penetration, then
5.After 5 minutes, disassemble fastener
6.Repeat procedure if necessary
1.Clean hands with Permatex brand hand cleaners.
PROPERTIES OF MATERIAL
Chemical Type Petroleum distillates
Appearance Clear liquid
Odor Light petroleum
Flash Point Aerosol, contents under pressure,
NFPA 704 Flammability Rating 4(Highly flammable)
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected
for use with chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8 to 28 ℃
(46 to 82 ℉)unless otherwise labeled. Optimal storage is at
the lower half of this temperature range.
The data contained herein are furnished for information only
and are believed to be reliable. We can not assume responsibi
lity for the results obtained by others over whose methods we
have no control. Permatex, Inc specifically disclaims all warr
anties expressed or implied, including warranties of merch
antability or fitness for a particular purpose, arising from sale
or use of Permatex, Inc. products and disclaims any liability
for consequential or incidental damages of any kind, including
lost profits. This product may be covered by one or more United
States or foreign patents or patent applications.