型号

包装规格

每箱数量

产品代号

PRODUCT DESCRIPTION:

Permatex High Tack Gasket Sealant is a yellow colored

viscous liquid with a characteristic solvent odor that is a blend

of elastomers and resins that is brushable and dries quickly to 

a highly tacky film. It is designed to seal or bond rubber,cork,

felt, paper and metal gaskets. It seals threaded hose connect

ions, waterproofs and protects electrical terminals and wiring.

PRODUCT BENEFITS

● Applies easily

● Fast drying

● Prevents seizing

● Assures correct gasket alignment

● Color coded for uniform application

● Allows easily automotive and industrial fluids

● Temperature Range -65℉   to +500℉ 

TYPICAL APPLICATIONS

● Gaskets

● Threaded connections

● Hose connections

● Weatherstripping

● Water proofing for electrical terminals, spark plugs and

   wires

● Rear axle assembly

● Tubeless tire beads

● Differential assemblies

● Filter line connections

● Terminal protector

DIRECTIONS FOR USE

1. Clean surfaces to remove all dirt, oil, rust, paints and

   dried sealants. Keep surfaces dry and free from mold

   release agents

2. Using brush, apply a thin, even coat on both surfaces

   to be assembled

3. Allow to set until solvent has evaporated and film is dry.

4. Assemble parts, Precoat gaskets or bolts for convenience

   in assembling

5. Remove with lacauer thinner.

PROPEIES OF UNCURED MATERIAL

                                                       Typical Value

Chemical Type                           Elastomers and resins

Appearance                                    Yellow liquid

Odor                                                    Ketonic

Specific Gravity                                     0.872

Flash Point, TCC                                     0 ℉

GENERAL INFORMATION:

This product is not recommended for use in pure oxygen

and/or oxygen rich systems and should not be selected as

a sealant for chlorine or other strong oxidizing materials.

For safe handling information on this product, consult the

Material Safety Data Sheet,(MSDS).

STORAGE

Products shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8 to 28 ℃

（46 to 82℉ ）unless otherwise labeled, Optimal storage is at

the lower half of this temperature range. To prevent contamination of unused product, do not return any material to

its original container.

NOTE:

The data contained herein are furnished for information only

and are believed to be reliable. we can not assume

responsibility for the results obtained by others over whose

methods we have no control, Permatex, Inc, specifically

disclaims all warranties expressed or implied, including

warranties of merchantability or fitness for a particular

purpose, arising from asle or use of Permatex, Inc.

products and disclaims any liability for consequential or incidental damages of any kind, including lost profits.

This product may be covered by one or more United States or 

foreign patents or patent applications.