Permatex Form A Gasket NO.2 Sealant
泰扬牌Form A Gasket 二号密封剂
Permatex Form A Gasket NO.2 Sealant
泰扬牌Form A Gasket 二号密封剂
一款值得信赖的垫圈密封剂/涂层/涂覆剂。它适用于一些非钢性、易振动的装配,形成一层柔韧性膜需要比较久的时间,它的最高适用温度可达204℃。耐各种溶剂特别是汽油。符合军标MIL-S-45180 D, TYPE II .
包装规格
型号 | 包装规格 | 每箱数量 | 产品代号 |
80009 | 1.5盎司卡式管装 | 12 | 2A |
80015 | 1.5盎司卡式管装 | 12 | 2AR |
80010 | 3盎司卡式管装 | 12 | 2B |
80016 | 3盎司卡式管装 | 12 | 2BR |
80011 | 11盎司卡式管装 | 12 | 2C |
Technical Data Sheet Permatex Form A Gasket No 2 Sealant PRODUCT DESCRIPTION: Permatex Form A Gasket No 2 Sealant is a black, viscous paste with a characteristic alcoholic odor. It is a slow dryi ng, flexible setting paste that changes to a pliable, non-ha rdening film through solvent evaporation. It seals flanges, fittings, connections and flexible assemblies against leaka ge, It increases the reliability of gasket seals. Conforms to MIL-S-45180D,Type II. PRODUCT BENEFITS: ● Improves reliability ● Extends gasket life ● Stops leakage ● Excellent for metal to metal assemblies ● Slow drying ● Flexibel setting TYPICAL APPLICATIONS: ● Threaded connections ● Cover plates ● Hose connections DIRECTIONS FOR USE: 1.Remove all previous material from mating surfaces. Permatex Gasket Remover is recommended for mos ls, not for plastics or painted surfaces. 2.For best results, clean and dry all surfaces with a resid ue-free solvent, such as Permatex Brake and Parts Cleaner. 3.Remove cap, puncture tube or cartridge seal and attach extension nozzle (if provided). 4.When used as a gasket dressing, spread product with a spatula to a uniform film on one side of gasket and then position it on the assembly, Coat the second side of gas ket and re-assemble, Slower drying formula increases work time. 5.Assembly is operational after 4 hours, full cure is affected after 24 hours. For Cleanup
PROPERTIES OF UNCURED MATERIAL Typical Value Chemical Type Modified resin, filler&alcohol Appearance Black paste Odor Alcoholic Specific Gravity 1.5 Viscosity Viscous paste Flash Point Does not apply | TYPICAL CURING PERFORMANCE: Permatex Form A Gasket No 2 Sealant once applied, develops a semi-flexible seal by solvent evaporation. Dry times will vary with temperature ,humidity and gap. TYPICAL ENVIRONMENTAL RESISTANCE Temperature Resistance Typical Values Continuous,℃(℉) -54 to 204 (-65 to 400) Chemical/Solvent Resistance The product retains effective properties in contact with water, ethylene glycol, gasoline ,mator oil, transmission fluid and sea water. GENERAL INFORMATION This product is not recommended for use in pure oxygen and/ or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. For safe handling information on this product, consult the Material Safe Data Sheet,(MSDS). STORAGE Products shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8 to 28℃ (46 to 82℉)unless otherwise labeled. Optimal storage is at the lower half of this temperature range, To prevent contamination of unused product, do not return an material to its original container. NOTE: The data contained herein are furnished for information only and are believed to be teliable, We can not assume responsilili ty for the results obtained by others over whose methods we have no control, Permatex, Inc,specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Permatex ,Inc., products and disclaims any liability for consequ ential or incidental damages of any kind, including lost profits. This product may be covered by one or more United States or foreign patents or patent applications. |
●避免与皮肤及眼睛直接接触,请于使用时戴上塑胶手套及安全护目镜。
●若因接触皮肤引起过敏及红斑,请以肥皂及清水沖洗;若不慎触碰到眼睛时,请立即以清水沖洗并就医诊查
●勿吞食、勿让孩童取用。
●使用本材料的工作环境须通风良好,勿在密闭空间使用。