型号

包装规格

每箱数量

产品代号

PRODUCT DESCRIPTION

Permatex Copper Spray-A-Gasket Hi-Temp Sealant is an

aerosol product formulated as a sealant which helps dissi

pate heat, prevents gasket burnout and improves heat

transfer.

PRODUCT BENEFITS

● Contains metallic copper to improve heat transfer and

    eliminate hot spots

● Remains tacky to allow gasket repositioning

● Works in temperature from -50℉  and 500℉

● Resists shop fluids, including gasoline

● Fills surface imperfections

TYPICAL APPLICATIONS

● May be used in any high temperature application where

   heat dissipation is required.

DIRECTIONS FOR USE

1.Provide adequate ventilation.

2.Surfaces should be free of oil, dirt and grease.

3.Mask areas that should not be coated.

4.Shake can with ball agitator for one minute. For best

   results, aerosol can should be at room temperature

   before spraying.

5.Holding can 8 to 10 inches from the surface to be

   coated, press the nozzle and discharge the product

   uniformly. Apply to both sides of gasket. DO NOT

   SPRAY into engine compartment Avoid overspray.

   Allow solvent to evaporate before assembly.

For Cleanup

1.Turn can upside-down and spray to clear nozzle.

2.Clean hands with Permatex brand hand cleaners.

Note: Aerosol product will coat 10 to 12 standard gaskets.

PROPERTIES OF MATERIAL

                                                       Typical Value

Chemical Type                                 Phenolic

Appearance                              Metallic copper film

Odor                                                  Solvent

Flash Point                      Aerosol,contents under pressure,

                                                         consult MSDS

NFPA 704 Flammability Rating          4(Highly Flammable)

GENERAL INFORMATION

This product is not recommended for use in pure oxygen

and/or oxygen rich systems and should not be selected as

a sealant for chlorine or other strong oxidizing materials.

For safe handling information on this product, consult the

Material Safety Data Sheet(MSDS).

STORAGE

Products shall be ideally stored in a cool dry location in

unopened containers at a temperature between 8℃ to 28℃

(46℉ to 82℉) unless otherwise labeled. Optimal storage is at

the lower half of this temperature range.

NOTE

The data contained herein are furnished for information only

and are believed to be reliable. We can  not assume

responsibility for the results obtained by others over whose

methods we have no control. ITW Permatex, Inc.

specifically disclaims all warranties expressed or implied,

including warranties of merchantability or fitness for a

particular purpose,arising from sale or use of Permatex,

Inc. products and disclaims any liability for consequential

or incidental damages of any kind, including lost profits.

This product may be covered by one or more United States or

foreign patents or patent applications.