Copper Spray A Gasket 耐高温密封剂80697

Permatex Copper Spray A Gasket Hi Temp Adhesive Sealant

泰扬Copper Spray A Gasket耐高温密封剂



一种快干性的金属铜密封剂,有助于分散垫片表面热量,防止垫片烧毁,同时改善了传热性能。可填补表面细小凹点,即时密封,可耐受各种流体特别是汽油的溶解作用。该产品的有效温度范围在-45℃至260℃之间。


包装规格

型号

包装规格

每箱数量

产品代号

80697

12盎司喷罐

12

101MA


PRODUCT DESCRIPTION

Permatex Copper Spray-A-Gasket Hi-Temp Sealant is an

aerosol product formulated as a sealant which helps dissi

pate heat, prevents gasket burnout and improves heat

transfer.


PRODUCT BENEFITS

● Contains metallic copper to improve heat transfer and

    eliminate hot spots

● Remains tacky to allow gasket repositioning

● Works in temperature from -50℉  and 500℉

● Resists shop fluids, including gasoline

● Fills surface imperfections


TYPICAL APPLICATIONS

● May be used in any high temperature application where

   heat dissipation is required.


DIRECTIONS FOR USE

1.Provide adequate ventilation.

2.Surfaces should be free of oil, dirt and grease.

3.Mask areas that should not be coated.

4.Shake can with ball agitator for one minute. For best

   results, aerosol can should be at room temperature

   before spraying.

5.Holding can 8 to 10 inches from the surface to be

   coated, press the nozzle and discharge the product

   uniformly. Apply to both sides of gasket. DO NOT

   SPRAY into engine compartment Avoid overspray.

   Allow solvent to evaporate before assembly.


For Cleanup

1.Turn can upside-down and spray to clear nozzle.

2.Clean hands with Permatex brand hand cleaners.

Note: Aerosol product will coat 10 to 12 standard gaskets.


PROPERTIES OF MATERIAL

                                                       Typical Value

Chemical Type                                 Phenolic

Appearance                              Metallic copper film

Odor                                                  Solvent

Flash Point                      Aerosol,contents under pressure,

                                                         consult MSDS

NFPA 704 Flammability Rating          4(Highly Flammable)


GENERAL INFORMATION


This product is not recommended for use in pure oxygen

and/or oxygen rich systems and should not be selected as

a sealant for chlorine or other strong oxidizing materials.

For safe handling information on this product, consult the

Material Safety Data Sheet(MSDS).


STORAGE

Products shall be ideally stored in a cool dry location in

unopened containers at a temperature between 8℃ to 28℃

(46℉ to 82℉) unless otherwise labeled. Optimal storage is at

the lower half of this temperature range.


NOTE

The data contained herein are furnished for information only

and are believed to be reliable. We can  not assume

responsibility for the results obtained by others over whose

methods we have no control. ITW Permatex, Inc.

specifically disclaims all warranties expressed or implied,

including warranties of merchantability or fitness for a

particular purpose,arising from sale or use of Permatex,

Inc. products and disclaims any liability for consequential

or incidental damages of any kind, including lost profits.

This product may be covered by one or more United States or

foreign patents or patent applications.



●避免与皮肤及眼睛直接接触,请于使用时戴上塑胶手套及安全护目镜。

●若因接触皮肤引起过敏及红斑,请以肥皂及清水沖洗;若不慎触碰到眼睛时,请立即以清水沖洗并就医诊查

●勿吞食、勿让孩童取用。

●使用本材料的工作环境须通风良好,勿在密闭空间使用。