型号

包装规格

每箱数量

产品代号

PRODUCT DESCRIPTION

Permatex Hydraulic Jack Oil is a clear, viscous refined

petroleum liquid for protecting and lubricating hydraulic units.

Hydraulic Jack Oil is specially designed to lubricate, prevent

sludge formation and resist rusting in hydraulic units. It

preserves seals and is non-foaming, It maintains correct viscos

ity and permits hydraulic actuating mechanisms to function

properly in temperatures from-49℉ (-45 ℃） to 120℉(48℃）。

Permatex Hydraulic Jack Oil contains anti-oxidant, anti-rust

and anti-wear additives for maximum service life. It is non-

corrosive to steel. aluminum alloy, magnesium, plated steel,

cadmium and copper.

PRODUCT BENEFITS

● Lubricates

● Prevents sludge build-up

● Resists rusting

● Preserves seals

● Non-foaming

● Maintains correct viscosity

● Contains anti-rust,anti-ocidant and anti-wear additives

● Will not affect most rubbers used in hydraulic systems

TYPICAL APPLICATIONS

● Floor jacks

● Floor lifts

● Hydraulic hand jacks

● Hydraulic lift gates

● Knee action shock absorbers

● Pallet jacks

● Motorcycle front forks

DIRECTIONS FOR USE

1.Clean filler plug by wiping away excess dirt.

2.Consult the literature of each manufacturer and fill to the

   proper level.

3.Before replacing filler plug, coat with a small amount of 

   Permatex Form-A-Gasket #2, to prevent leaks.

4.Note:For best results, routinely drain,flush and change

   hydraulic fluid at periodic intervals.Typically, 1-2 times a

   year for normal usage.

PROPERTIES OF UNCURED MATERIAL

                                                              Typical Value

Chemical Type                                          Mineral oil

Appearance                                               Amber liquid

Odor                                                        Mild petroleum

Specific Gravity                                                  0.91

SAE Viscosity number                                          20

Saybolt Viscosity

     SUS@80℉                                                      240

      SUS@100℉                                                    165

      SUS@210℉                                                      45

Flash Point, TOC,℉

GENERAL INFORMATION

This product is not recommended for use in pure oxygen

and/or oxygen rich systems and should not be selected

for use with chlorine or other strong oxidizing materials.

For safe handling information on this product, consult the

Material Safety Data Sheet,(MSDS).

STORAGE

Products shall be ideally stored in a cool, dry location in

unopened containers at a temperature between 8℃ to 28 ℃

(46 ℉ to 82℉)unless otherwise labeled. Optimal storage is at

the lower half of this temperature range. To prevent

contamination of unused product, do not return any material to 

its original container.

NOTE

The data contained herein are furnished for information only

and are believed to be reliable. We can not assume

responsibility for the results obtained by others over whose

methods we have no control. Permatex, Inc.specifically

disclaims all warranties expressed or implied, including

warranties of merchantability or fitness for a particular

purpose, arising form sale or use of Permatex, Inc.

products and disclaims any liability for consequential or 

incidental damages of any kind, including lost profits.

This product may be covered by one or more United States or

foreign patents or patent applications.