型号

包装规格

每箱数量

产品代号

PRODUCT DESCRIPTION

Permatex Belt Dressing & Conditioner is a specially

formulated, high quality belt dressing that is designed to

eliminate squeaks, aid in power transfer and increase belt

life.The product penetrates the cord fibers to restore pliability 

andflexibility. Prevents belt slippage due to heat, cold, dampness,

dust and glazing.

PRODUCT BENEFITS

●  Increase pulling power of belt

●  Protects belt from deterioration due to oxidation and heat

●  Remains soft, does not harden or glaze

●  Easy application, aerosol spray for maximum coverage,

    extension tube for hard to reach areas

●  VOC compliant

TYPICAL APPLICATIONS

●  V-belts or flat belts of rubber, leather or fabric

●  Automotive

●  Farm equipment

●  Industrial belt drives

Note: Not recommended for use on serpentine belts

DIRECTIONS FOR USE

1. Provide adequate ventilation.

2. Shake can thoroughly before use. Note: There is no ball

    agitator inside the can. For best results, aerosol can

    should be at room temperature before spraying.

3. Attach extension tube

4. While engine is running, spray lightly on inner working

    surface of belt near smallest or uppermost pulley. Allow

    belt to run for several minutes to condition and cure

    dressing . Reapply as needed.

    Caution: Do not come into contact with moving parts.

5. Do not apply an excess, a uniform, thin coat is sufficient.

    If the liquid runs off, it indicates an over-application

Note: Prolonged or recurring squeaking is an indication that

the belt should be replaced due to excessive wear and

deterioration.

For Cleanup

1. Turn can upside-down and spray to clear nozzle.

2. Clean hands with Permatex brand hand cleaners.

PROPERTIES OF MATERIAL

                                                   Typical Value

Chemical Type                                 Rubber

Appearance                                  Clear liquid

Odor                                                  Solvent

Flash Point                 Aerosol, contents under pressure,

                                                     consult MSDS

NFPA 704 Flammability Rating     4 (Highly flammable)

GENERAL INFORMATION

This product is not recommended for use in pure oxygen

and/or oxygen rich systems and should not be selected

for use with chlorine or other strong oxidizing materials.

For safe handling information on this product, consult the

Material Safety Data Sheet, (MSDS).

STORAGE

Products shall be ideally stored in a cool, dry location in

unopened containers at a temperature between 8℃ to 28℃

(46 ℉ to 82℉) unless otherwise labeled. Optimal storage is at

the lower half of this temperature range.

NOTE

The data contained herein are furnished for information only

and are believed to be reliable. We cannot assume

responsibility for the results obtained by others over whose

methods we have no control. Permatex, Inc. specifically

disclaims all warranties expressed or implied, including

warranties of merchantability or fitness for a particular

purpose, arising from sale or use of Permatex, Inc.

products and disclaims any liability for consequential or

incidental damages of any kind, including lost profits.

This product may be covered by one or more United States or

foreign patents or patent applications.