白色锂基脂80345、 81981

Permatex White Lithium Grease

泰扬白色锂基脂


是一种白色通用型、金属之间或金属和塑料之间的润滑产品,可起到防腐蚀的保护作用。该产品不含任何ODC成分,同时耐高温及潮湿环境。Level3


包装规格



型号

包装规格

每箱数量

产品代号

80345

1.5液体盎司卡式管装

12

WL-9

81981

16盎司喷罐

12

195DA


●避免与皮肤及眼睛直接接触,请于使用时戴上塑胶手套及安全护目镜。

●若因接触皮肤引起过敏及红斑,请以肥皂及清水沖洗;若不慎触碰到眼睛时,请立即以清水沖洗并就医诊查

●勿吞食、勿让孩童取用。

●使用本材料的工作环境须通风良好,勿在密闭空间使用。

 


PRODUCT DESCRIPTION

Permatex White Lithium Grease is a liquid aerosol lubricating

paste designed to reduce friction between load bearing mov

ing metal surfaces and/or the combination of metal and pla

stic surfaces. The product also protects metal surfaces from

corrosion.


PRODUCT BENEFITS

● Multi-purpose, high temperature, long lasting lubricant

● No-sag Teflon based formula increases lubricity

● Easy application, aerosol spray for maximum coverage

● Excellent rust and corrosion inhibitor

● VOC compliant


TYPICAL APPLICATIONS MRO

● Open gears and chains

● Slide conveyors ,guide rails

● Bearings, cams, pistons

● Machinery, tools and equipment


DIRECTIONS FOR USE

1.Provide adequate ventilation

2.Shake can thoroughly until the ball agitator inside the can

   is free. For best results. aerosol can should be at room te

   mperature before spraying.

3.Holding can 8 to 10 inches from the surface for open area

   lubrication, or using the extension tube provided for hard

   to reach areas,press the  nozzle and discharge the product

   on the assembly.

4.Repeat procedure if necessary.


For Cleanup

1.Turn can upside-down and spray to clear nozzle.

2.Clean hands with Permatex brand hand cleaners.


PROPERTIES OF MATERIAL

                                                           Typical Value

Chemical Type                                   Lithium grease

Appearance                                          White film

Odor                                                         Mild

Worked Pentrometer, ASTM D-217,mm       290 to 310

Dropping Point ASTM D-566 ℃(℉)       193(380)

Oxidation  ASTM D-942, psi                     5.0max

Rust 3 Bearing ASTM D-1743                      1,1,1

Performance temperature range℃(℉)        -10 to 150(-15 to 300)

Flash Point                                     Aerosol, contents under pressure,

                                                                         consult MSDS

NFPA 704 Flammability Rating                       4(Highly flammable)

Measure of consistency of a grease to detemine its plasticity

The temperature at which a grease turns to a liquid state

The resistance of lubricating greases to oxidation

Corrosion preventive properties of lubricating grea

This product is not recommended for use in pure oxygen

and/or oxygen rich systems and should not be selected as

a sealant for chlorine or other strong oxidizing materials.

For safe handling information on this product, consult the

Material Safety Data Sheet,(MSDS).


STORAGE

Products shall be ideally stored in a cool, dry location in

unopened containers at a temperature between 8 to 28℃

(46 to 82℉)unless otherwise labeled. Optimal storage is at

the lower half of this temperature range.


NOTE

The data contained herein are furnished for information only

and are believed to be reliable. We cannot assume

responsibility for the results obtained by others over whose 

methods we have no control. Permatex, Inc. specifically

disclaims all warranties expressed or implied, including

warranties of merchantability or fitness for a particular

purpose,arising from sale or use of Permatex, Inc.

products and disclaims any liability for consequential or

incidental damages of any kind, including lost profits.

This product may be covered by one or more United States or

foreign patents or patent applications.


●避免与皮肤及眼睛直接接触,请于使用时戴上塑胶手套及安全护目镜。

●若因接触皮肤引起过敏及红斑,请以肥皂及清水沖洗;若不慎触碰到眼睛时,请立即以清水沖洗并就医诊查

●勿吞食、勿让孩童取用。

●使用本材料的工作环境须通风良好,勿在密闭空间使用。